搜索结果: 1-14 共查到“核科学技术 Design”相关记录14条 . 查询时间(0.25 秒)
Jacobs has been awarded a contract to design and engineer maintenance systems for the International Thermonuclear Experimental Reactor (ITER) fusion project.
WENRA calls on industry to help expedite reactor design assessments（图）
WEMRA 反应堆设计 西欧核监管机构协会
2023/4/17
The Western European Nuclear Regulators Association (WENRA) has set out the steps that industry must take to ensure the timely, harmonised licensing of small modular reactor (SMR) and advanced modular...
Rolls-Royce SMR Limited's 470 MWe small modular reactor (SMR) design has successfully completed Step 1 of the UK's Generic Design Assessment (GDA) process and progressed to the next phase.
IAEA Team in Uzbekistan Concludes Site and External Events Design (SEED) Review for the Country’s First Nuclear Power Plant（图）
原子能机构 核电厂 场址 外部事件设计评审
2023/3/16
An International Atomic Energy Agency (IAEA) team of experts has concluded a five-day mission to Uzbekistan to review the country’s safety processes for evaluating the site of its first nuclear power ...
Numerical Simulations and Design Optimization of the PHT Loop of Natural Circulation BWR
Numerical Simulations Natural Circulation BWR
2009/9/3
Mathematical modeling and numerical simulation of natural circulation boiling water reactor (NCBWR) are very important in order to study its performance for different designs and various off-design co...
Use of Nuclear Data Sensitivity and Uncertainty Analysis for the Design Preparation of the HCLL Breeder Blanket Mockup Experiment for ITER
Nuclear Data Design Preparation
2009/9/3
An experiment on a mockup of the test blanket module based on helium-cooled lithium lead (HCLL) concept will be performed in 2008 in the Frascati Neutron Generator (FNG) in order to study neutronics c...
The SPES3 Experimental Facility Design for the IRIS Reactor Simulation
The SPES3 Experimental Facility IRIS Reactor Simulation
2009/9/2
IRIS is an advanced integral pressurized water reactor, developed by an international consortium led by Westinghouse. The licensing process requires the execution of integral and separate effect tests...
核电工程建设中的设计接口管理（The Design Interface Management in Nuclear Power Project Construction）
设计接口 管理 ICM
2008/11/19
介绍了在核电工程建设中应用接口控制手册（ICM）进行设计接口的管理。阐述了ICM的编制原则、接口程序建立、接口条目编制和接口手册的定期升版等。阐明了使用ICM的优越性。
岭澳核电站常规岛三维模型设计特点简评（Characteristics of 3D-Model Design Used in CI Project of Ling ao NPP）
三维设计技术 经验 差距 思路
2008/11/18
三维设计技术是当前世界上普遍采用的先进设计方法。通过回顾ALSTOM与广东电力设计研究院（GEDI）在岭澳核电站工程中开展的三年多的三维合作设计经历，阐述了在设计过程中成功运用的一些设计管理办法及应用程序，并就核电设计自主化引进三维设计技术的重要性、我们目前尚存的不足以及应该开展的准备工作等方面给出了一些思路。
秦山三期工程土建设计审查与改进（Qinshan Phase III Civil Work Design Review & Its Improvement ）
秦山三期 土建 设计审查 改进
2008/10/29
通过介绍业主对秦山三期土建设计审查所取得的良好效果说明了设计审查的必要性和重要性，以供借鉴。
百万千瓦级压水堆核电厂蒸汽发生器国产化能力分析（Domestic Design and Manufacture Capability Assessment Of 1 000 MW PWR Steam Generator ）
压水堆 蒸汽发生器 国产化
2008/10/22
蒸汽发生器是压水堆核电厂的关键设备。经过数十年的努力，我国目前已基本掌握百万千瓦级压水堆核电厂蒸汽发生器关键设计技术，具备了设计和制造能力，可以满足新建核电厂蒸汽发生器国产化的要求。本文论述了我国百万千瓦级压水堆核电厂蒸汽发生器研发需要掌握的关键技术，现有的蒸汽发生器自主设计和制造能力，并对蒸汽发生器国产化比率作出估计。
提高自主设计能力 推进核电国产化 （Enhancing the Self-Reliant Design Capability Promoting Nuclear Power Localization ）
核电 设计 自主化
2008/10/10
本文根据作者的工作实践和体会，从确定技术路线标准体系的选择、规范设计文件、确定专业接口、设计规程的制订、设计工具的配套和重视设计验证配套设施的建设等七个方面提出了提高自主设计能力的意见和建议。
先进型沸水堆的热工水力设计和热工裕量(The Thermal Hydraulic Design and Thermal Margins of Advanced Boiling Water Reactor )
先进型沸水堆 热工水力设计 热工裕量
2008/10/8
简要介绍先进型沸水堆（ABWR）热工水力设计的特点、安全限值与热工裕量及热工水力设计与URD的符合性。
nuclear regulatory commission Finds Problem with Tank Design of Low to Moderate Safety Significance
cooling water Nuclear Power Station
2007/3/9
February 12, 2007，The Nuclear Regulatory Commission staff has issued its final determination that the calculation method used by Clinton Nuclear Power Station to ensure proper functioning of a pump ne...
