搜索结果: 1-6 共查到“机械制造工艺与设备 Investigation”相关记录6条 . 查询时间(0.077 秒)
Experimental Investigation of Capacity Control Scheme on System Performance for a Machine Tool Cooler
machine tool cooler hotgas suction regulation capacity control
2011/8/4
Highly accurate manufacture in machining industry can only be obtained with precise temperature control of the coolant (oil or water). Machine tool with more accurate, stable and advanced the precisio...
Use of SEM and EDS analysis in the investigation of Al-Si-Cu piston alloy cast porosity
casting porosity piston
2009/10/23
Porosity formation was detected in the casting thinnest section in the proximity of the as cast surface and near the wall centerline. In order to investigate the cause of the porosity formation light ...
Investigation of the coatings applied onto brake discs on disc-brake pad pair
coating improving disc performance Disc Thickness Variation (DTV)
2009/10/23
While braking, according to the severity of it, thermal, metallurgical, constructive and tribological occurrences emerge on the brake disc-pad interface. In this study, NiCr was sprayed as bonding lay...
Investigation of Turbulators for Fire Tube Boilers Using Exergy Analysis
Boiler Turbulator Fire Tube Effciency Exergy
2009/10/13
In this paper,an experimental study of ve di erent types of \turbulator" inserts for re tube boilers is presented. The experimental setup was constructed in the Department of Mechanical Engineering ...
Design,Manufacture and Investigation of Cracking Efficiency of a Stone Cracking Machine with Periodic Loading and Sloping Jaw
Stone cracking machine Apricot and Almond
2009/10/13
In this study, a stone cracking machine with periodic loading, and a shaky and sloping jaw which breaks apricot and almond stones was designed and manufactured. For determining the cracking eciency o...
Cutting stability investigation on a complicated free surface machining
Five-axis machining Frequency response Vibration modes
2010/1/19
Purpose: Both the results obtained previously relating to structure dynamics of a simultaneous five-axis
movement machine tool and to the investigations on dynamic cutting behavior are further applie...
