搜索结果: 121-135 共查到“工学 Composites”相关记录167条 . 查询时间(0.046 秒)
Investigations of Lignocellulosic Materials from Rape for the Purpose of Producing Composites with Thermoplastic Polymers
Producing Composites Thermoplastic Polymers
2009/2/10
Investigations of Lignocellulosic Materials from Rape for the Purpose of Producing Composites with Thermoplastic Polymers。
Investigations of the Rock-Polymer Composites as a Gasket for HPHT Apparatus
the Rock-Polymer Composites HPHT Apparatus
2009/2/10
Investigations of the Rock-Polymer Composites as a Gasket for HPHT Apparatus。
Investigations of Thermal Conduction in GF/PA 6 Composites with a Thermovision Camera
GF/PA6 composite degree of crystallinity thermal conductivity
2009/2/8
The main aim of this paper is the development of a thermovisual method for determining the influence of the distance between reinforcing fibres in thermoplastic composites on the thermal conductivity,...
Crystallinity of Polyamide-6 Matrix in Glass Fibre/Polyamide-6 Composites
hybrid yarn glass fibres/polyamide-6 composite crystallinity DSC WAXS
2009/2/7
Glass fibre/polyamide-6 (GF/PA6) composites were manufactured from specially designed hybrid yarns. PA 6 multifilament and staple polyamide fibres were used as thermoplastic materials.
The glass mult...
Optimal Design of Reinforcing Fibres in Multilayer Composites using Genetic Algorithms
optimisation process genetic algorithm fibre-reinforced multilayer composite
2009/2/7
The present paper is devoted to the problem of optimally design reinforcing fibres in a composite so that the material satisfies requirements over a range of mechanical properties. A method based on t...
Nanostructure of melt-processable molecular composites
melt-processable molecular composites small-angle X-ray scattering nanostructure
2009/2/6
Novel melt-processable molecular composites were obtained from iPP and liquid crystalline oligoester(LCO). The nanostructure and thermal behaviour of these molecular composites were examined by acombi...
Some Properties of Eucalyptus Wood Flour Filled Recycled High Density Polyethylene Polymer-Composites
Recycled HDPE polymer-composites mechanical properties coupling agent TGA DSC
2009/1/7
The mechanical properties of eucalyptus wood flours (EWF) filled recycled high density polyethylene (HDPE) composites were investigated. First thermal gravimetric analysis (TGA) and differential scann...
Tensile mechanical properties in PP/SEBS/Microballon composites under impact loadings
Properties Mechanical properties Strain rate
2010/1/19
Purpose: The mechanical properties of the syntactic polymer foams at the intermediate and high strain rates
were not understood comprehensively. Then, this study characterizes the tensile mechanical ...
Manufacturing and damage mechanisms in metal matrix composites
Metal matrix composites Damage mechanisms SEM
2010/1/19
Purpose: Mechanical properties of metal matrix composites (MMCs) are essentially functions of the
manufacturing processes. Surface state and roughness conditions as well as the type of matrix reinfor...
Microstructural characterisation of EN AW6061 alloy matrix composites with Ti3Al intermetallics reinforcement
Mechanical alloying Aluminium matrix composites Intermetallics
2010/1/19
Purpose: The main aim of this work is to investigate microstructure of EN AW6061 matrix composites with
Ti3Al intermetallics reinforcement produced by powder metallurgy techniques and hot extrusion.
...
Laser beam interactions with metal matrix AlSi alloy/SiCp composites
Metal matrix composites Heat treatment Laser modelling
2010/1/19
Purpose: The purpose of the research discussed in this paper was to identify the physical processes that take
place when a focused laser beam acts on a metal matrix composites reinforced with silicon...
Interfacial damage effect on the cryogenic mechanical response of carbon nanotube-based composites under bending
Cryomechanics multiscale modeling bending test
2010/9/27
This article examines the effect of interfacial damage on the cryogenic mechanical response of carbon nanotube (CNT)-based polymer composites under bending through experiments and multiscale simulatio...
Stresses around a crack in an adhesive layer between woven laminate composites
Woven composites Cracked adhesive layer Anisotropic half-planes
2010/9/27
Woven composite materials are made of epoxy layers reinforced by textile, and thin epoxy layers that bond the reinforced layers. In the present paper, the composites are modeled by an isotropic epoxy ...
湖南大学史才军教授应邀担任国际著名学术刊物《Cement and Concrete Composites》的编委
Cement and Concrete Composites 史才军教授 编委 水泥混凝土
2008/12/29
Development of microstructure affected by in-mould manipulation in polymer composites and nanocomposites
Nanocomposites Engineering polymers Polymer processing
2010/2/4
Findings: Significant increment of fracture energy depending of applied conditions including melt temperature and time of shearing of polymer blend.
Research limitations/implications: Obtained nanoco...