工学 >>> 林业工程 >>> 森林采运学 林业机械 林业机械化与电气化 木材学 木材加工与人造板工艺学 木材防腐学 林产化学加工学 林业工程其他学科
搜索结果: 1-15 共查到林业工程 MECHANICAL-PROPERTIES相关记录21条 . 查询时间(0.342 秒)
Rosin is renewable biomass with the potential to enhance wood properties. However, its high leaching rate restricts the durability of rosin impregnation. To immobilize rosin in wood structure, polymer...
The effects of composite fabrication, such as pre-curing, curing temperature, and cooling rate, were studied. In this work, the pre-curing was defined as heat treatment of Multi-Walled Carbon Nanotube...
Cellulose composites with polyethylene (PE) permit to reinforce this commodity polymer, while at the same time introducing renewable content and thus minimizing the use of petroleum-based feedstocks. ...
Complex three-dimensional (3D) pore geometries, useful for tissue engineering scaffolds, can be fabricated via photo-crosslinking of resorbable poly(propylene fumarate) (PPF) resins using stereolithog...
Epoxy resin is widely used to make composites, electronic and electric parts, adhesives, and coating materials because it has excellent thermal, electrical, and mechanical properties. Using natural ma...
Environmentally friendly and lightweight silylated cellulose nanocrystal (SCNCs)/waterborne polyurethane (WPU) composite films that exhibit excellent mechanical properties and water resistance were pr...
Shear creep property of wooden I-beams of 235 mm depth and three flange sizes with Todomatsu (Abies sachalinensis) lumber and Karamatsu (Larix kaempferi) plywood was examined by bending creep tests wi...
This paper deals with problems of the effect of changes in density and amount of glue on mechanical properties of OSB (oriented strand boards). Tests of mechanical properties were carried out on OSB...
Effects of various environmental conditions on mechanical properties of wooden I-beams with Todomatsu (Abies sachalinensis) lumber and Karamatsu (Larix kaempferi) plywood were investigated. Five type...
In this paper stress relaxation of water-swollen wood was discussed with two conditions of temperature change, i.e. 1) specimens at 20°C were heated rapidly to 30-80°C, and 2) specimens at 30-80°C wer...
Built-up beams were made of two Sugi (Cryptomeria japonica D. Don) planks fastened together with wood pegs. In this study we investigated the edgewise bending properties of Sugi planks and 2ply built-...
In order to prepare wood specimens for subsequent measurements of mechanical properties, we examined the selective and uniform elimination of wood constituents from a 4 mm thick cross section of hino...
To study the optimum experiment conditions for determining the mechanical properties of wood which is in an unstable state due to temperature changes, the fluidity (1-Et/E0) in stress relaxation, the...
To study mechanical properties of wood exposed to variations of temperature, in this study the swollen wood (water-swollen wood & ethylene glycol-swollen wood) was preheated at 30-180°C and quenched t...
In order to define the effects of thermal expansion and thermal decomposition on the destabilization of quenched wood, we measured the stress relaxation of steam-treated wood and oven-dried wood under...

中国研究生教育排行榜-

正在加载...

中国学术期刊排行榜-

正在加载...

世界大学科研机构排行榜-

正在加载...

中国大学排行榜-

正在加载...

人 物-

正在加载...

课 件-

正在加载...

视听资料-

正在加载...

研招资料 -

正在加载...

知识要闻-

正在加载...

国际动态-

正在加载...

会议中心-

正在加载...

学术指南-

正在加载...

学术站点-

正在加载...