搜索结果: 1-12 共查到“工学 Slurry”相关记录12条 . 查询时间(0.046 秒)
Inherent relations between yield stress and stability of bubble petroleum coke water slurry
Petroleum coke Petroleum coke water slurry (PCWS) Stability Yield stress Orthogonal experiment
2018/4/2
The stability of petroleum coke water slurry (PCWS) is currently a hot topic. The inherent relationship between yield stress and stability of bubble-PCWS was studied through orthogonal experiments and...
Treatment of Swine Slurry by an Ozone Treatment System to Reduce Odor
Swine Slurry Odor Treatment Ozone
2013/3/12
Development of a technology that can reduce the odor of liquid swine manure during agitation and land application could prove beneficial to the swine industry. The purpose of this study was to evaluat...
Influence of heat treatment on micro-structure of slurry aluminide coatings type TiAlSi obtained on TiAlCrNb alloy
Thin and thick coatings Aluminides Microstructural stability
2009/12/14
Purpose: Influence of heat treatment on microstructural changes in slurry TiAlSi coating deposited with 12.5% Si concentration on Ti48Al2Cr2Nb intermetallic alloy and investigation of the influence of...
Experimental and Numerical Investigationsof an Ice-slurry Generator
ice generator ice-slurry numerical simulation
2009/11/16
A new test facility equipped with refrigerant and brine circulation systems, and a rotating-scraper ice-slurry generator was constructed to analyze the ice-slurry flow and heat transfer accompanied by...
Fractal Geometry of Particle Aggregates Formed in Calcium Sulfite Slurry
sedimentation fractal geometry Stokes' Law
2009/11/16
The solid-liquid separation is an important operation for the regenerated slurry of dual-alkali FGD system, and calcium sulfite could predominate in particle aggregates of the slurry. The settling vel...
Dead Sea Mud Slurry Flow in a Horizontal Pipe.
The abrasive wear behaviour of alloy cast steel in SiC-water slurry
Wear resistance cast steel Hadfield cast steels Wear resistance
2011/4/1
The results of abrasive wear tests carried out in an environment of SiC-water slurry on four grades of cast steel, i.e. carbon cast steel with microadditions of vanadium, low-alloy L70H2GNM cast steel...
Design Cement Slurry for Safe and Economic Well Operation
Life Finite element Analysis Zone Isolation
2009/5/8
The purpose of primary cementing is to provide zonal isolation during the life of the well so that the hydrocarbons can be produced safely and economically. Recently, the industry has taken the expl...
New mixtures and technologies for biogas production at biogas plants of agricultural type processing livestock slurry
slaughter waste biogas plant biogas production
2014/2/26
The basis of the biogas production in agriculture is the processing of waste agricultural products (particularly excrements of farm animals but also phytomass). Different but rather similar is the bio...
Slurry wear characteristics of zinc-based alloys: Effects of sand content ofslurry, silicon addition to alloy system and traversal distance
zinc-based alloys slurry wear behaviour material removal mechanisms erosion− corrosion− abrasion
2010/3/17
This investigation deals with the observations pertaining to the effects of specimen and slurry compositions as well as traversal distance on the slurry wear response of a zinc-based alloy. The compos...
Evaluation of Several Nonstarter Lactobacilli for Their Influence on Cheddar Cheese Slurry Proteolysis
nonstarter lactobacilli proteolysis ripening cheese slurries
2008/3/28
Ten strains of nonstarter lactobacilli were evaluated for proteolytic ability in Cheddar cheese slurries by ripening anaerobically at 30°C for 12 d. Fresh Cheddar curds were made under controlled cond...
Si-modified aluminide coating deposited on TiAlNb alloy by slurry method
Surface treatment Aluminide coatings
2010/2/22
Purpose: Increasing oxidation resistance of TiAl intermetallic alloy by depositing aluminide coating by slurry method and investigation of the influence of Si addition on structure of obtained coating...